6. Adjust Menu
6.2.2
Flat Bottom Plates
Adjust Menu
other yes
Plate: X
- + other yes
Confirm selection of Adjust menu
Plate type definition menu
Use
-
and
+
keys to select required plate type
(1 -9)
Plate bottom form setting
Use
-
and
+
keys to select required bottom form
(flat or round)
Set dispensing position
Use
-
and
+
keys to move the plate support so
that the dispensing needles are in the correct position
Set aspirating position 1
Use
-
and
+
keys to move the plate support so that
the aspirating needles are in the correct position
Bottomform Flat
- + exit yes
Disp.Pos XXX
- + exit yes
Asp.Pos 1 XXX
- + exit yes
Asp.Pos 2 XXX
- + exit yes
Asp.Pos Botm XXX
- + exit yes
Set bottom aspirating position
Use
-
and
+
keys to move the manifold so that the
aspirating needles are in the correct position for
aspirating the bottom of the wells
Washpos Botm XXX
- + exit yes
Set bottom washing position
Use
-
and
+
keys to move the manifold so that the
aspirating needles are in the correct position for
the bottom washing procedure
Washpos Ovfl XXX
- + exit yes
Set overflow washing position
Use
-
and
+
keys to move the manifold so that the
aspirating needles are in the correct position for
the overflow washing procedure
Plate: X
- + other yes
Select plate type to be defined
Set aspirating position 2
Use
-
and
+
keys to move the plate support so that
the aspirating needles are in the correct position
Only used if Crosswise Asp. is set to Yes.
Name:
890
↵
ABCDE
Enter the required name for the program
(up to eight characters)
6-4
Instructions for Use for Columbus Washer No. I 109 006 Rev No. 2.2
May 2003
