44 1672 103-E
HORNET W 85 H INOX
13
5.
Automatic pump nozzle A2003-ES
5.1.
Technical Deskription
5.1.1.
General Description
The automatic pump nozzle A2003-ES in an automatically-closing full hose nozzle for
the dispensing of fluids listed under no. 2.2 The A2003-ES automatic nozzle have
been tested in accordance with the DIN EN 13012 standard.
The standard features of the nozzle include: a safety switching-off and a covering
that protects against wear and cold conditions.
The type A2003-ES nozzle is made of stainless steel with an outlet diameter of 3/4”
(19mm)
5.1.2.
Appropriate use
The automatic nozzle is state of the art manufactured and is failsafe.
However hazards can arise from this product if it is not used according to
specifications.
Each person concerned with the assembly, commissioning, maintenance and
operation of the automatic nozzle must have read and understood the entire manual.
The automatic nozzle of type A2003-ES is only to be used for dispensing aqueous
urea AUS32 as per ISO 22241 (DEF)!
Using the machine for any other purpose would constitute inappropriate use. The
manufacturer shall not be liable for any resultant losses or damages; the risk shall be
borne by the operating company alone in such cases.
Adherence to the assembly, commissioning, operating and maintenance conditions
prescribed by the manufacturer also qualifies as proper use.
The automatic nozzle may only be used on dispensing installations with motor driven
pumps. The volumetric flow of the delivery pump may not exceed 10.5 gpm (40
l/min) or fall below
3.1 gpm (12 l/min)
.
The zero delivery inlet pressure must not exceed 50 psi (3.5 bar). The minimum
operating pressure is 10 psi (0.7 bar). The local safety and accident prevention
regulations apply to the operation of the automatic nozzles.
