visioair HD
Duct cleaning system
This connection is made using a low pressure hose.
Connect the low pressure hose to the inlet connector of the
pneumatic tool to be used.
The pressure of the compressed provided is set according to the
operating requirements of the tool. This setting is done using the
regulator shown in the figure. To increase the pressure, pull the
regulator out and turn it clockwise. The outlet pressure is shown
on a digital display located above the compressed air outlet.
Connect the low pressure hose to your VISIOAIR HD.
operating instructions
Use with a pneumatic tool:
17-26
Outlet pressure regulator
display
5
