TEC MA-600 Series Скачать руководство пользователя страница 14

Страница: 14 / 164

5. DISPLAY

EO1-11154

5.2 10-digit 7-segment Numeric Display

5- 4

ERROR MESSAGE TABLE (

continued

)

Error Message

(Standard Setting)

Cause of the Error

Cancelling the Error

CASHING PROHIBIT

Cheque cashing prohibition error

The depressed key has been programmed with

the status of no-purchase cashing prohibition.

Contact your nearest TOSHIBA TEC

representative if necessary.

NEGATIVE NUMBER

Negative balance error when the credit balance

is allowed by the program option.

Perform the discount operation within an

allowance.

PROGRAM ERROR

Programming error

VOLTAGE ERROR

Printer voltage error

Contact your nearest TOSHIBA TEC

representative.

It is recommended to prepare a copy of the above table, and place it near the ECR.

5.2 10-digit 7-segment Numeric Display

(1) Numeric Display

AMOUNT

(7 digits)

Displays the numeric data such as amount and quantity. When the obtained total or

subtotal amount is 10-digit value, the

RPT

and

DPT

digits are also used for the amount

display. When no entries are under way and the Mode Lock is in the

REG

position, the

current time is displayed.

DPT

(2 digits)

Displays a Department Code of a department item just entered. The department name is

also displayed in the LCD display. It remains lit when the entry of the same department

item is repeated.

RPT

(1 digit)

Displays the repeat count of the same Department or PLU item. The count is indicated

from the second entry on, and only the lowest digit of the repeat count will be displayed

even when the count exceeds nine (such as “0” for 10, “1” for 11, etc.)

5.3 Message Description (Status Lamps)

Status Lamp

Colour

Description

ALM

Red

Illuminates with the alarm buzzer generated to indicate that the last operation or

numeric entry was an error. To clear the error status, depress the

[C]

key.

SLIP

Green Blinks when the program option “slip print compulsory” has been selected. This

lamp does not illuminate even when a slip is set to the slip printer.

R OFF

Red

Illuminates when the Receipt-OFF mode is declared by the

[LOG/RECEIPT]

(or

[RECEIPT]

) key. In this condition, no receipts will be issued for a sale to be

entered. It extinguishes by depressing the

[LOG/RECEIPT]

(or

[RECEIPT]

) key

again for Receipt-ON mode.

SIGN ON

Green

Illuminates only when the Cashier Code Entry method is selected. It illuminates

when a cashier has signed ON. It extinguishes when the cashier has signed

OFF, and the message “LOG” is displayed in the LCD display instead.

Green Illuminates during data communication between the ECR and a PC.

Green Illuminates on a finalizing operation with the total amount displayed when the sale

is finalized without any amount tendered.

Green Illuminates when the

[ST]

key is depressed, indicating that the displayed amount

is subtotal.

Red

When an amount tendering operation is performed, it illuminates with the change

due displayed.

Содержание MA-600 Series





































































































































































Результаты поиска

Содержание MA-600 Series

Отзывы:

Бренды по названию

Популярные бренды

TEC MA-600 Series, Руководство пользователя

Результаты поиска

Содержание MA-600 Series

Отзывы:

Бренды по названию

Популярные бренды