background image

11. REGISTERING PROCEDURE AND PRINT FORMAT

 

EO1-11155 

 

11.44 When a Power Failure Occurs...

 

11-47 

11.44  When a Power Failure Occurs... 

If a power failure occurs, all sales data stored in the memory are automatically protected by the battery installed 
in the ECR.  The battery is rechargeable and it is recharged when the AC power returns.  As the power returns, 
the ECR revives to continue the work and displays the last item entered before the power failure.  However, 
please note the following phenomena to occur on the ECR when the power is regained: 
 
1.  The printer will work to print the entered data without failure after the power recovery, if any data was being 

printed.  However, one extra line may be fed on the power recovery depending on the power-recovery timing. 

 
2. The following are the display indications on the power recovery: 
 

ECR CONDITION at the time of Power Failure 

DISPLAY INDICATION on the Power Recovery 

No key-in has been operated. 

Displays zero.  Operations may go on. 

OUTSIDE A 

SALE 

Numeric or Declaration keys have 
been entered but not motorized keys. 

Regains the display content that was obtained just 
before the power failure.  The operations may be 
continued. 

No Numeric or Declaration keys have 
been entered. 

DURING A 

SALE 

Numeric or Declaration keys have 
been entered. 

Regains the display content that was obtained just 
before the power failure.  The operations may be 
continued. 

 
In case a power failure occurred during printing, after the power recovery, the power failure symbol “**” is printed 
in one line. 
 
Example: 
 

-- Journal Print Format -- 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
DP09                   

$

2.00 

DP09                   

$

1.00 

******************************** 
DP11                   

$

0.50 

SUBTL                    

$

2.50 

CASH                   

$

2.50 

MISC                     

$

3.00 

CHANGE                   

$

0.50 

 
ITEM    2 
JONES               0357 18:55TM 

Содержание MA-600-1 series





























































































































































































Отзывы: