TEC AutoCAN-F v6, Техническое руководство

Страница: 7 / 16

7
www.TEC-electronics.ru
TEC-63062-1 AutoCAN-Fv6
Table 2. Module Inputs/Outputs Configuration (Menu 2)
№ Option Description
Setting range/
Default
Note
1 Programmable output No. 2
1-39 /Alternate Hazard
Lights control
Alternate Hazard Lights control is used in the
vehicles where control via the CAN-bus is not
possible.
2 Output No. 2 polarity - / Negative polarity
LED is off - negative polarity.
LED is on - positive polarity.
3 Programmable output No. 3
1-39 / Alternate Central
Lock control
Alternate Central Lock control is used in the
vehicles where control via the CAN-bus is not
possible.
4 Output No. 3 polarity
1-39 / Alternate Central
Lock control
LED is on – positivepolarity output.
LED is off – negativepolarity output.
5 Programmable output №4 1-39/1 Security
6 Programmable output №5 1-39/12 All doors
7 Programmable output №6 1-39/17 Engine is started
8 Programmable output №14 1-39/25 Brake
9 Programmable output №15 1-39/15 Ignition
10 Programmable output №20 1-39/12 Trunk
11 Programmable output №21 1-39/12 Hood
12 Programmable output №22 1-39/26 Handbrake
13 Programmable output №9 1-13/1 Activate Central Lock + Comfort (command)
14 Programmable output №10 1-13/2 Deactivatecentral lock (command)
15 Programmable output №11 1-13/3 Open trunk (command)
16 Programmable output №12 1-13/10 Hood control
17 Programmable output №23 1-13/4 Turn lights activation
18 Programmable output №24 1-13/12 Brakelights condition control
Annotations to the Table
Options Nos. 1, 3, 5-12 are designed for creating custom configuration of the controller by assigning
any of 39 functions to a particular output (see Programmable Output Functions Table).
Options Nos. 13-18 are designed for creating custom configuration of the controller by assigning
any of 12 functions to a particular input (see Programmable Input Functions Table).
Options Nos. 2, 4 enable setting the required polarity of the controller outputs Nos. 2 and 3.
The polarity can be set only if one of 39 functions has been programmed in these outputs (see
Programmable Output Functions Table).