TEC 710, Руководство по установке

Страница: 12 / 16

12
TEC-61157-1 Installation Manual-700/710 USB
Configuring user functions
Menu 2 . User features
# Name
Factory
default
settings
On Off
LED
Number of
audio signals
LED
Number of
audio signals
1 PIN
TO
Drive® (except TEC-700)
On On 1 Off 2
2 AntiHiJack (except TEC-700)
3 Distance for enabling AntiHiJack (except TEC-700) 1
Range from 1 to 10: 1 – 100 meters;...10 – 1000 meters
Distance before engine lock.
4 Siren operation when alarm is triggered 4
Range from 1 to 4: 1 – siren is disabled; 2 – siren won’t be enabled on
warning; 3 – warning signal volume equals arming/disarming volume
(refer to function #11); 4 – siren is enabled (Maximum volume)
5 Audio notification that PIN code is being awaited
after disarming
Off
On 1 Off 2
6 Audio confirmation of authentication by PIN-code
On
7 Automatic deactivation of maintanence mode
8 Close central lock while driving
Off
9 Open central lock if ignition is off
10 Automatically close windows (
"
Comfort
"
) On
11 Volume of arm/disarm notifications 4
Range 1 to 4: 1 – silent arm/disarm; 2 – minum volume level;
3 – medium; 4 – maximum
12 Disarm by PIN-code notification Off On 1 Off 2
Programming sequence
1. Turn on the ignition.
2. Enter PIN code, wait for confirmation.
3. To enter the Alarm configuration menu press the Programming
button 12 times (do it not later than 10 seconds after entering
the PIN code). The Alarm will confirm it with 4 audio and light
signals.
4. Select menu option by pressing and releasing the Programming
button the number of times matching the number of option.
The Alarm will confirm the option number with a series of audio
and light signals
5. Go to option setting by pressing and holding the brake pedal.
The Alarm will notify of the option status with a series of audio
signals.
6. Adjust option settings by pressing the Programming button
the number of times matching the number of steps from the
current status to the required one. Please remember that from
the last function the program will go to the first one.
7. Release brake pedal. Now you can move to programming the
next function or exit the programming mode.
8. Go to configuring another option by pressing the Programming
button the number of times matching the number of steps
from the current status to the required one. For example, to
go from option 2 (AntiHiJack feature) to option 8 (Activation
of Central Lock while driving), press the Programming button
6 times.
You can exit programming mode at any moment by turning off
the ignition. If no actions were taken within 60 seconds and brake
pedal was released, the Alarm will exit programming mode. A trill
will sound.
Change PIN-code
1. Turn on the ignition.
2. Enter PIN code, wait for confirmation.
3. Press the Programming button 14 times. The Alarm will confirm
it by 1 audio and light signal.
4. Set the new PIN code by using any combination of buttons.
Pressing is confirmed by the audio and light signals..
5. Wait for confirmation by 1 audio and 1 light signal.
6. Re-enter the new PIN code.
7. Wait for confirmation:
• 2 audio and light signals and a trill mean that the PIN code has
been changed and the Alarm has left the PIN code changing
mode
• Sound alert means that the PIN code has not been changed: a
mistake has been made when entering the new PIN code, and
it is necessary to repeat the procedure of changing the PIN
code starting from step 4.
You can exit the PIN code changing mode anytime by turning the
ignition off.
It is impossible to set PIN equal to 1; 1 - press on the button.
Change programming button
1. Reset all settings to factory defaults.
2. Interface the Alarm with the vehicle.
3. If analog steering wheel buttons are used, please define them
(see above for the description of this procedure).
4. In order to assign any of the buttons perceived by the Alarm as
the Programming button, press the selected button and hold it
for longer than 5 seconds until a long audio signal will be heard.
he Programming button can be assigned within 15 minutes after
interfacing the Alarm with the vehicle.