9
C
ommissioning - Introduction
The TEC 100/200 Digital has 18 main programs, these being:
1.
Calendar
2.
On/Off
Times
(Two
On/Off Periods per day)
3.
Frequency
(Once,
Twice,
24
Hours)
4.
Select
Days
(Every
Day,
Weekends,
Week
Days)
5.
Optimise On Time
( 0 to 240 minutes)
6.
Optimise Off Time
( 0 to 240 minutes)
7.
Maximum Flow Temperature
(30ºC to 85ºC)
8.
Minimum Flow Temperature
(25ºC to 85ºC)
9.
Minimum Return Temperature
(20ºC to 65ºC)
10.
Mid
Temperature
(0ºC
to
85ºC)
11.
Night
Temperature
(0ºC
to
85ºC)
12.
Frost
Temperature
(0ºC
to
35ºC)
13.
External Cut Off Temperature
(0ºC to 35ºC)
14.
Differential
(1ºC
to
5ºC)
15.
Hot
Water
Priority
(Yes
/
No)
16.
Internal/External Optimisation
(Yes / No)
17.
Calibration
(-10ºC/+20ºC)
18.
Rotation
(Yes
/
No)
Certain Differentials and the Compensation Slope are fixed within the software,
i.e. Return Temp 2ºC, External Temp 2ºC, Compensation Slope 1.5.
Keypad and Running Mode Overview
Used to enter Programming Mode from normal running mode,
and to access Change Mode for the selected program.
P
PROGRAM
Used to cycle through the program list when in Programming
SELECT
Mode and to change program settings when in Change Mode.
Used to cycle through the program list when in Programming
Mode and to change program settings when in Change Mode.
RETURN
