TEC Industry and Trade Co.,Ltd
TJ-4080 UV Printer User Manual
Place the machine after removing the package. Insert the power cord as indicated in
Fig.1
. Please pay
attention to voltage in your own area. Make sure the ground wire is well connected to avoid the leakage of
electricity.
Please ask TEC support team to be sure your printer is 110V or 220V, it will damage printer if load
wrong voltage!
Fig.1
!
Please DO NOT make USB cable connected at first.
Press
Power Button
and then press Auto. Till platform is backward to stop, press Printer Ready Switch to
start printer.
Self-Inspection will be executed when the machine starts, which will take about 2 minutes. Ready light is
flashing at this time. DO NOT execute any actions at this moment. On-line light will be normally on after
the start. Test machine’ condition by pressing Enter, Out, Up and Down.
Warning
p
Press
General Power Button
before turning on printer, then press
Ready button
about 3 seconds
later to start main engine of printer.
p
First press
READY
, and then press
GENERAL Power Button
to turn the power and printer off.
p
DO NOT SEND MORE THAN ONE PRINTING JOB TO RPINTER WHEN THE FIRST JOB IS
NOT FINISHED!
p
DO NOT use two different USB cable at the same time.
18
