Install the wheel reflectors.
Connect all the electrical cables from the loom to the
handlebars. These are all colour coded. Make sure
to get the alignment right. Ensure there is enough
slack to rotate the handlebars without stressing
these cables.
Install the indicator panel and connect this to the
loom. Mount the button panel near the grips where it
is easy to access.
Install the front reflector.
Assemble the basket and mount to the rear section of
the frame.
You can now install the battery, and take the bike out
for a quick test ride to check all functionality. If you
are unsure of anything – have a bicycle mechanic
check your tricycle over or call us here at TEBCO!
