2. The internal battery of smarT.power is being charged:
Flashing red:
1%-30% charged,
smarT.power
is charging
Flashing orange:
31%-50% charged,
smarT.power
is charging
Flashing green:
51%-99% charged,
smarT.power
is charging
Continuous green light:
smarT.power
is fully charged. The charging process can be
stopped.
To recharge
smarT.power
use a standard USB charger with a 5V 1A charging port (e.g.
from a smartphone) and the USB charging cable supplied. The cable is plugged into the
charging input (8) (under the rubber cap). A charge cycle takes about 6 hours if the re-
chargeable battery is almost or completely empty.
Waterproof and dustproof in accordance with IP65. What does this mean?
You can use smarT.power even in heavy rain and off-road.
smarT.power
is appropriately
waterproof and dustproof for these conditions. However, the following requirements must
be observed:
smarT.power must never be immersed or submerged in water!
If this happens, for
example as the result of a fall, immediately switch off
smarT.power
completely, wipe dry
all ports and blow water out of them. Then please send the device to the service center
Manual - SMART power RZ EN_Layout 1 23.01.14 14:50 Seite 5
