Assembling and Using Your Product
03
Questions?
Scan Here
V
W
1. The solar pump is designed for fountain, pond or outdoor use. In order to make the solar
pump work, the solar panel needs to be in direct sunlight. When the sun light is strong
enough, the solar pump will start to work automatically. It will stop working when the solar
panel is in shadow or the sunlight is not enough. If the fountan is used in evening, three
warm LEDs will give light automatically to enhance the beauty scene of the water jet.
2. This solar pump is equipped with a battery pack. Extra electricity will be stored in the battery
pack and to be used when there is no enough sunlight or in night times.
1. Unpack all components carefully. Please keep in mind that some water may splash over
the rim of a bowl, do not set up the fountain on a surface which may be damaged by water.
2. Align and insert the water tube which is on the bottom of the fountain top and place the jar
on the fountain body. Lead the water tube and LED lights cable through out the opening
which is on the back of fountain body. Insert the water tube into the pump outlet which is on
the top of pump. Place the pump upright into the fountain basin. Connect the LED lights with
the LED cables separetely and connect the
pump power cord with solar, until the parts
are secured together.
3. Insert the stake into the hole which is on the
bottom of solar panel bracket.
4. Make sure the solar panel gets direct sun light.
5. Press on button (switch) which is on the back
of solar
The solar fountain is now ready for use.
Overview
3. Press the button (switch) which is on the back of solar panel
Turn on: fountain will work
Turn off: It is only for power charged, pump and LED lights not work.
Note :
1. Charge the solar unit for at least two days before the pump is used fot the first time
2. The LED light will work only when it’s dark.If you want to test in the daytime, turn the solar
panel upside down and minimise exposure to sunlight.
