Team Powers XPS-pro Скачать руководство пользователя страница 11

Страница: 11 / 11

can be granted. For quick repair-and return service, please add your address and detailed description

of the malfunction.

If Team Powers are unable to service those defective products that are no longer exist in the market,

we shall provide you with a product that has at least the same value from one of the successor

series.

The specifications like weight, size and others should be seen as in this user guideline. Due to

ongoing technical improvements, which are done in the interest of the product, Team Powers does

not take any responsibility for the accuracy of these specs.

Distributor Service:

◎

Package your product with sales receipt together with the detailed description of malfunction.

◎

Send parcel to your national Team Powers dealer/distributor.

◎

Distributor repairs or exchanges the product.

◎

Shipment back to your usually by COD (cash on delivery), but this is subject to the general

policy of your national Team Powers dealer/distributor.

If any further information need upon reviewing the instruction, please feel free to contact

. For more about Team Powers product information, please go to the

below web sites.

http://www.rc-explorer.com

http://www.team-powers.com

Содержание XPS-pro











