Team Orion Vortex R8.1 pro, Инструкция по эксплуатации

Страница: 17 / 55

www.teamorion.com 17
14. BEC Voltage
This parameter sets the voltage output of the ESC BEC
system that powers the electronics in your car. WARNING!
Using 7.2V will increase the servo performance but requires
compatible electronics (regular electronics only work with
6V). Using 7.2V with 6V electronics can damage them.
› Setting value 6V or 7.2V
RESTORE DEFAULT SETTINGS
With the ESC powered ON and the throttle in the neutral
position, press and hold the “SET” key for 5 seconds, the red
and green LED will flash simultaneously indicating that the
parameters have been reset to the factory default values.
PROGRAM BOX
The optional program box (ORI65153) allows you to modify
all of the ESC parameters and to modify/update the ESC
firmware (via the PC software). It is the ideal way to adjust
your ESC.
• The program box is required to use the the PC software.
• The program box firmware is independent from the ESC
firmware. You may need to update the program box or
ESC firmware via the PC software so that they can work
together.
Note: connect the program box to the ESC using the ESC top
sensor connector and the special sensor adapter.