Team Nisca Nisca PR5350, Руководство по эксплуатации, Страница: 21 / 64

18
Section 3:
Installation
□
First, please confirm that you have read the Cautions about installation.
3
- a) Environment for installation
The equipment can be used in the ambient temperature of 10
～
35
゜
C
（
50
～
95
°
F
）
but to ensure the best performance, temperature range of 20
～
25
゜
C
（
68
～
77
°
F
）
is recommended. Humidity should be 35 - 80% (RH) and without condensation.
□
This pri nt er i s very much sensiti ve to dust . Do not i nst a ll i t in dust y room.
→
If dust remains on the pri nting surface of t he card, it w ill direct l y affect
the printed i mage. In the worst case, it will damage t he Print Head and the
Printer.
□
Do not place near the equipments which emit magnetic field.
→
It may destruct the magnetic encodi ng data if t he Magnetic Encoder is being
used. In t he worst case, it may cause equi pment trouble.
3
- b) Space for installation
The space for the operation as
shown in the illustration should
be provided.
◆
At least 20 cm
（
8inch
）
of
clearance should be kept for the Top Cover.
◆
Table to place the printer
should be able to hold minimum
25Kg
（
55lbs
）
and have flat top
and 4 rigid legs.
◆
It should not incline more
than 1
゜
.
3
- c) Preparation for Installation
Take out the printer from the shipping carton, confirm that all contents are
included as listed in section 2 -a) and place it on the installing table.
Make sure that the main switch is in OFF position before placing the printer on
the table. Before connecting the plug into the power outlet, make sure once again
that the main switch is OFF.