Team Nisca Nisca PR5300, Руководство по эксплуатации

Страница: 32 / 57

- 30 -
Setting the System Environment: Printer Status
This item must be set according to the system being used. So, follow the system
instructions for setting.
To enter this menu, in order to prevent operational error, follow the
instruction on the display and press Clear key and Exe key at the same time.
Others are same as the basic operation.
Menu Function
Set the usage of the printer memory for the data.
Memory Mode
Set ON/OFF of the parity.
Parity Set
Select Hi-Co or Low-Co. ( Hi-Co supporting encoder only) Encode Type
When this is ON, encoding is done before printing.
Encode First
Set the entry direction into the encoder (face or back).
Encode Mode
When this is ON, data in the memory is printed by Exe key.
EXE Key Print
When this is ON, card with error is re-output by Clear key.
Print Retry
Encoding and printing are executed simultaneously.
PrallelPrint
To change the card surface side when the card is ejected.
Card Eject Face
To change the printable area on the card. (Full edge or 0.5mm
Print Area
from all edge of a card)
Depending on the system, these functions may be invalid.
If the optional encoder is not included, messages relating to Encode will
not be displayed.
Encode Type displays, only when the optional encoder of ISO Hi-Co standar
is connected. This must be set according to the magnetic characteristics of
the card being used.
¤If the magnetic characteristics of the card is different from the settings
of this menu, normal encoding will not result.