57
122
125
133
110
110
23
132
55
126
50
122
57
BAG E (Continued)
!
Step 22. Pick up your car, making sure that the CVD's (59)
stay in the outdrives (77).
!
Step 23. Position the bottom of an assembled rear shock in
front of the shock mounting area on the right rear suspension
arm (50). Align the hole in the shock mount ball (122) with the
inside hole in the arm (50).
!
Step 24. Attach the shock to the rear arm (50) by threading a
4-40 x 1/2" cap-head screw (57) through the shock mount ball
(122) and all the way into the inside hole of the suspension arm
(50).
!
Step 25. Slide a short shock mount bushing (132), large side
first, over the screw (23) on the right side of the rear shock tower
(55).
!
Step 26. Place the top of the shock body (126) over the shock
mount bushing (132). Secure the shock to the tower (55) by thread-
ing a 4-40 locknut (110) onto the shock mount screw (23).
*NOTE: Before attaching the top of the shock, make sure that the
CVD is in place in the outdrive.
!
Step 27. Repeat Steps 23 through 26 for the left rear shock.
!
Step 28. Insert the shock end (120) of a front shock into the
shock mounting area of the right front suspension arm (38) and
line up the hole in the shock mount ball (122) with the middle
hole in the arm (38).
!
Step 29. Secure the shock to the front arm (38) by threading
a 4-40 x 1/2" cap-head screw (57) all the way into the arm (38)
from the rear.
!
Step 30. Slide a long shock mount bushing (133), large side
first, over the screw (23) on the right side of the front shock tower
(24).
!
Step 31. Place the top of the shock body (125) over the shock
mount bushing (133) on the front shock tower (24). Secure the
shock to the tower (24) by threading a 4-40 locknut (110) onto the
shock mount screw (23).
!
Step 32. Repeat Steps 28-31 for the left front shock.
2 3
Figure 49
Figure 50
Figure 49
Figure 50
57
110
57
110
