26
8 CONSOLE INSTRUCTIONS (COUGAR-VIPER SPORT)
Power On
During power on, the battery gauge will do an initialization with all the LEDs light up for 2 seconds before
entering normal operation. If all the LEDs fail to light up, there is a fault in the battery gauge. Try to
switch On/Off the ignition key again to initialize.
Basic Operation
Battery level shows the state of charge of the battery. As you continue to cycle and the battery power
drops, the level gauge will correspond to the state of charge remaining. If the battery level shows
‘red’
, it
is nearly empty and need to recharge.
Power level shows the level of electric assistance in pedelec mode. There are 5 levels of assistance and
zero assistance. Use Up
▲
or Down
▼
button to increase or decrease the level of electric assistance
needed.
Setup Menu
Hold the ‘Down
▼
’ button for about 5 seconds to enter setup menu. Use Up
▲
or Down
▼
button to select
the appropriate settings. In menu setup, hold the ‘Down
▼
’ button for about 3 seconds to save.
Menu 1: Mode Selection
Mode 1 (Default): Pedelec / EBike (US): Power Led Bar shows the assist power level. When throttling, it
switches to EBike mode.
Mode 2: Pedelec (EU): Power Led Bar shows the assist power level. Throttling will be in 6km EBike mode.
Mode 3: Not in used. For future development.
Mode 4: Pedelec (EAF): Responds to throttle/EAF. Power Led Bar Bar shows the current (amps) level.
Mode 5: EBike (Cruise): Responds to throttle (from gauge). Power Led Bar shows the current (amps) level.
‘Up
▲
’ button set cruise.
