34
EN -
35
EN -
NOTE:
before cleaning the mixing bowl
5
in the dishwasher, always remove the
blade
29
.
Before every cleaning,
remove the blade seal
28
from the rest of the blade
29
.
• Place plastic accessories on the top rack of the dishwasher to avoid deformation
from the hot water and pressure.
29
28
5
13.3 Cleaning the accessories
1. Rinse the mixing bowl
5
with warm water and dump the water.
2. Remove the blade
29
(see “Using and removing the blade” on page 23) and take
the seal
28
off (see “Cleaning, checking and replacing seals” on page 34).
3. Clean all accessories by hand in a sink with water or in the dishwasher.
4. When cleaning by hand, rinse all parts with clean water.
5. Allow the parts to dry completely before using them again.
6. Before using the appliance again, reinsert the blade
29
.
13.4 Cleaning, checking and replacing seals
Remove seals
28
,
33
and
4
for cleaning and check them for damage. Pay attention to
changes (e.g. porous material or tears).
-
The removed seals
28
,
33
and
4
can be cleaned in the dishwasher.
-
Damaged seals
28
,
33
and
4
must be replaced with new ones.
WARNING!
• Prior to the next use, damaged seals
28
,
33
and
4
must be inserted again or
replaced with new ones. The operation without seals
28
,
33
and
4
in place is not
permitted.
Blade 29
1. Remove the blade
29
from the mixing bowl
5
(see “Using and removing the blade”
on page 23).
2. Pull seal
28
off the blade
29
.
3. Insert the cleaned seal or a new one.
4. Before using the appliance again, reinsert the blade
29
.
Deep steaming tray 3
1. Pull seal
4
off the underside of the deep steaming tray
3
.
2. Insert the cleaned seal
4
or a new one in the deep steaming tray
3
. Ensure that the
seal is in continuous contact with the surface without any damage.
Lid of the mixing bowl 34
1. Pull seal
33
off the underside of the lid of the mixing bowl
34
.
2. Insert the cleaned seal
33
or a new one in the lid for the mixing bowl
34
.
13.5 Cleaning, checking and replacing the spatula
The spatula
32
is provided with a detachable silicone scraper.
For cleaning, remove the silicone scraper, and check it for damage. Pay attention to
changes (e.g. porous material or tears).
-
Both parts can be cleaned in the dishwasher.
13.6 Descaling
When steaming with hard water, limescale may build up on the parts used, especially in
the mixing bowl
5
.
Normal cleaning
In most cases, the limescale deposits can be removed by cleaning in the dishwasher or
by hand.
Slight limescale deposits
1. Remove slight limescale deposits, which cannot be removed with normal cleaning
by hand or in the dishwasher, with a cloth on which you put some household vinegar.
2. Rinse with clear water.
Major limescale deposits
WARNING!
• Do not use commercially available descaling agent, not even glacial acetic acid
or vinegar essence.
1. Prepare a mixture of 50 % white household vinegar and 50 % boiling water.
2. Fill this mixture into the mixing bowl
5
or put other furred-up parts into a container
with this mixture.
3. Allow the mixture to react for 30 minutes.
