manualshive.com logo in svg

Teal SMA SUNNY MULTIGATE XT, Руководство по установке

Поделиться
Скачать
Teal SMA SUNNY MULTIGATE XT Скачать руководство пользователя страница 33

Installation Manual - TEAL PN 1060147 rev 2.5

33

TEAL Electronics

SMA America, LLC

Step by Step Output (Grid) Connection Instructions:

a. All electrical installations must be made in accordance with the locally applicable 

electrical standards and the 

National Electrical Code®

 (NE, ANSI/NFPA 70) (see 

National Electrical Code®

, section 690.8).

b. Tools required - Slotted screwdriver (blade width: 3.5 mm).

c. Do not use “wire nuts”.

d. Connection from Inverter: 

  

to life due to electric shock. Ensure that 

the two-pole circuit breaker is switched off and cannot be reconnected.

1. Route the AC cable of the utility grid through the knockout(s) or holes at the 

bottom of the enclosure to the Output terminal(s) of the Multigate XT located at 

the bottom of the enclosure (or directly to the Multigate terminals for the model 

XT1E).

2. Strip 3⁄8 in. (10 mm) insulation off each of the input AC cable wires.

3. 

NOTICE

 - If the grounding conductor and L1 or L2 are swapped, the Sunny 

Multigate could be damaged during commissioning.

4. 

Route the AC cable(s) of the inverters through the knockout(s) or holes at the 

bottom of the Multigate XT enclosure to the Input terminals of the Multigate XT 

located at the bottom of the enclosure (or directly to the Multigate terminals for 

the model XT1E), one inverter string per conduit. 

Each inverter string is to be 

connected with it’s own 3 conductor cable consisting of L1, L2, and PE. It is 

prohibited to merge different PE conductors.

5. Connect all conductors according to the terminal labels as shown on the door 

label.

6. Connect the grounding conductor of the AC cable(s) to the terminal(s) of the 

Multigate XT. Make sure that the conductor is inserted into the terminal(s) right 

up to the stop. 

7. Connect the L1 conductor(s) of the AC cable(s) to the L1 terminal(s) of the 

Multigate XT. Make sure that each conductor is inserted into the terminal right 

up to the stop.

8. Connect the L2 conductor(s) of the AC cable(s) to the L2 terminal(s) of the 

Multigate XT. Make sure that each conductor is inserted into the terminal right 

up to the stop.

9. Tighten all terminal screws of the connecting terminal(s) using a slotted 

screwdriver to the specified torque values on the door label or in the instruction 

manual, Section 6.2.

10. Ensure that all conductors are connected properly and securely in place.

Содержание SMA SUNNY MULTIGATE XT









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды