Insert the wires of the connecting cable into the jack (1) at the following position.
BU (a) and BN (b). Fix the cables with the elevator clamp of the jack (1).
Place the jack (1) in the jack housing (2,3) and screw tight with screws (4).
Insert the complete jack into the drive. Ensure the correct seating of the latching nose
(RN).
1)
2)
3)
1)
Insert plug from diagonally above.
Turn the plug downwards until the upper edge rests against the side part
Push the plug in.
Operating Manual
Technical Description
Installation Instruction
Teal Products Ltd
Unit 8A, Orchard Trading Estate,
Toddington, Cheltenham,
GL54 5EB, UK
+44 (0)1242 620318
[email protected]
www. tealproducts.co.uk
TCD1
6
