3
Enter the activation key provided by TEAC in the “Activation key“ field, and click OK.
IMPORTANT NOTE
o
The MAC address is required to receive the subject key from TEAC. See the last part of the section “Obtain an IP
address automatically (DHCP)” on page 4 or “Obtain an IP address manually” on page 5 for how to check
the MAC address.
o
Make sure that the UR-4MD is in the idle screen (date and time displayed) before entering the activation key.
Otherwise an error message will appear as shown below.
Error message:
4
When “Reboot Required” appears, turn the UR-4MD off and on again.
If “Setting value is invalid” appears, the activation key might be incorrect. If activation fails even after entering the
activation key again, contact the TEAC’s authorized reseller where you purchased the unit.
General
8
