51
11-1-3. Peak hold
11-1-3-1. No Zone Definition
While a Hold On command is active or while a control input terminal Hold signal is ON, the maximum value (peak value) in the indi-
cator value positive direction is held. Sending a Hold Off command or making the Hold signal OFF will end the peak hold.
When holding, sending a Hold Clear command or making the control input terminal Clear signal ON will also reset the peak value.
CLEAR
HOLD
OFF
ON
OFF
ON
OFF
ON
Indicator value
Time
Sensor input value
Level response
Pulse response
Holding
Indicator value
ATTENTION
When using Clear and Hold signals (when level response), maintain the ON state for at least 10 msec.
11. Hold function settings
