Teac TD-700T, Инструкция по эксплуатации

Страница: 13 / 20

13
1-3. Sensor signal input terminals
1
2
3
4
5
6
7
+EXC(A)
–SIG(B)
–EXC(C)
+SIG(D)
SHIELD
+SENS/TEDS(F)
–SENS/GND(G)
Terminal
number
Signal name Wire color
1 +SENS/TEDS (F) Orange
2 −SENS/GND (G) Green
3 +EXC (A) Red
4 −SIG (B) Black
5 −EXC (C) Blue
6 +SIG (D) White
7 SHIELD (E) Yellow
o
Terminals 1 and 2 are data terminals for use by both remote
sense and TEDS sensors. Before connecting the sensor,
set which type will be connected in advance using the
Remote Sense/TEDS setting on the Calibration menu
page. If “Remote Sense disabled/TEDS enabled” is selected,
calibration will occur automatically if a sensor with TEDS
built-in is connected.
o
The wire colors are those that we use in the strain gauge
transducers that we make.
1-4. D/A output connectors
These can output either voltage or current.
They cannot output both at the same time. Set voltage or
current in System Settings
q
D/A Converter
q
D/A Output
Mode (page 75).
Terminal
number
Signal
name
Explanation
9 V-OUT D/A voltage output
10 I-OUT D/A current output
11 COM D/A output common terminal
o
The D/A output is isolated from this unit’s circuits.
1. Names and functions of parts