Teac T-H380DNT, Руководство пользователя

Страница: 29 / 32

29
Troubleshooting
If you experience any problems with the unit, please take a
moment to look through this chart and see if you can solve the
problem yourself before you call your dealer or a TEAC service
centre.
DAB tuner
No sound.
e
Ensure that the unit has been able to locate DAB stations.
“NO stations Available” appears on the display.
e
Check that the DAB antenna is connected (see page 5).
e
Ensure that DAB broadcast covers your area.
Cannot access secondary services.
e
Not all services are accompanied by secondary services. If a
secondary service is available, the secondary indicator (“>>”) is
displayed next to the station name.
Display goes out or displayed “service off air”.
e
This may occur if a broadcaster changes the label of a service
or removes the label whilst you are listening to it. The unit will
try to retune to this station. If the problem persists, follow the
procedure for channel scan on page 10.
A burbling sound is heard on some stations.
e
DAB system is able to produce quality audio from a low level
signal, but when the signal level is too low, a “burbling” sound
might be heard. To reduce this, try repositioning your antenna
to gain maximum signal strength.
If normal operation cannot be recovered, unplug the power cord
from the outlet and plug it again.
Internet radio
Cannot connect to the Internet.
e
Check if your computer can connect to the Internet using the
same network.
e
Enter a correct pass key to the network.
e
Check the settings of your network’s firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
Cannot listen to a station/Podcast.
e
The broadcaster has a temporary trouble with Internet
connection.
e
Check if your Internet connection is not temporarily
disconnected or disturbed.
Cannot find a station/Podcast in the station list.
e
The station/Podcast may not be broadcast at the moment.
e
Add the station/Podcast to your own station list by accessing
the Internet radio portal.
To reset your unit to the factory default
If your unit is not working properly, it might help to reset it to the
factory default.
This will clear your network settings (including pass keys) and
other user settings (preset stations etc.).
1. If the unit is on, press the STANDBY/ON button to turn the unit
on standby.
2. Hold down the TIMER button.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted neutral cleaning liquid. Be sure to remove any fluid
completely. Do not use thinner, benzine or alcohol as they may
damage the surface of the unit.