Teac T-H380DNT, Руководство пользователя

Страница: 16 / 32

16
How to select preset stations (FM/AM)
1 Select AM or FM by pressing the BAND button repeatedly.
2 Select the preset tuning mode.
Press the ENTER button repeatedly until “Preset tune” is displayed.
3 Select a preset channel by turning the TUNING/SELECT
knob.
The selected preset channel is tuned in.
How to select DAB preset stations
See “Preset Tune” on page 11.
1
3 2
FM
<
Preset tune
>
CH01 108.00MHz
Preset Tuning 2 RDS
The Radio Data System (RDS) is a broadcasting service which allows
stations to send additional information along with the regular radio
programme signal.
RDS works on the FM waveband in Europe only.
1
Tune in an FM station (see page 14).
2 Press the INFO/RDS MODE button.
Each time the INFO/RDS MODE button is pressed, the RDS mode
is changed as follows:
PROGRAM SERVICE
When you select PROGRAM SERVICE, “PROGRAM SERVICE” will
blink for about 3 seconds and then the programme service
name or a station’s name will be displayed. If there is no
programme service data, the frequency will be displayed.
PROGRAM TYPE
When you select PROGRAM TYPE, “PROGRAM TYPE” will blink
for about 3 seconds and then the programme type will be
displayed.
RADIO TEXT
When you select RADIO TEXT, “RADIO TEXT” will blink for about
3 seconds and then the news of stations composed of up to 64
symbols will be displayed.
If there is no radio text data, RDS mode will be automatically
switched to PROGRAM SERVICE mode.
TRAFFIC ANNOUNCE
When you select TRAFFIC ANNOUNCE, “TRAFFIC ANNOUNCE”
will blink for 3 seconds and then the unit searches for a traffic
announcement.
<
When a traffic programme is found, the TRAFFIC ANNOUNCE
mode is switched to PROGRAM SERVICE mode.
If the station currently selected is transmitting a traffic program
signal, the RDS mode will be switched to PROGRAM SERVICE
mode without searching for a traffic program.