31
ENGLISH
30
<
The unit can be programmed to turn on
at a specified time. The unit will turn off
60 minutes after the specified time.
<
The unit can store 2 timer settings into
memory.
<
Adjust the clock before setting the timer
(see page 15).
Press and hold the ALARM button (1
or 2) for more than 3 seconds.
The digital clock blinks and the “ALARM
1” or “ALARM 2” indicator appears on
the display.
<
If no button is pressed for 60 seconds,
the timer setting mode will be cancelled.
1
Turn the Skip rotary knob (
.
or
/
) to set the start time, and then
press the ALARM button.
<
From step
through
, make sure to
press the same ALARM button you
selected in step .
Turn the Skip rotary knob (
.
or
/
) to select a source (CD, TUNER or
BUZZ), and then press the ALARM
button.
<
You cannot select “AUX”.
<
If you select BUZZ (buzzer), proceed to
step .
6
3
1
4
2
2
Timer 1
STANDBY/ON
ALARM 1/2
SKIP
(
.
/
/
)
If you select CD or TUNER in step ,
turn the Skip rotary knob (
.
or
/
) to set the volume, and then
press the ALARM button.
Setting the timer is now completed and
the timer is turned on.
The ALARM button lights up.
Prepare the source.
When the source is set to “CD”, set a
CD.
When the source is set to “TUNER”, tune
in a station.
Press the STANDBY/ON switch to
turn the unit off (standby).
Don’t forget to turn the unit off
(standby), or the timer won’t work.
6
5
3
4
In case ALARM 2 overlaps ALARM 1:
Example:
ALARM 1 (Start time: 7:00, Source: CD)
ALARM 2 (Start time: 7:30, Source: TUNER)
The unit turns on at 7:00 with CD, and
turns off at 8:00.
ALARM 2 doesn’t work at all.
Note that if the unit is in the snooze mode
at the start time of ALARM 2, ALARM 2
will work; the source will switch to TUNER
at 7:30 and the unit will turn off at 8:30.
<
Playback volume will gradually increase
till your set volume when the unit is
turned on by timer.
<
If the source is set to “CD” but no disc is
set, the unit will turn on with a “BUZZ”
alarm.
<
When the source is set to TUNER, The
unit will turn on with the station you
selected last time.
<
If the unit is disconnected from the
power supply for more than 30 minutes,
clock and timer settings will be erased.