10
Battery Precautions
¾
Be sure to insert the batteries with correct positive “+” and negative “_” polarities.
¾
When the remote control unit is not to be used for a long time (more than a month), remove the
battery from the remote control unit to prevent it from leaking.
¾
If the batteries leak, wipe away the leakage inside the battery compartment and replace the
batteries with new ones.
¾
Do not use any batteries other than those specified. Do not mix new batteries with old ones.
¾
Do not heat or disassemble batteries. Never throw them in fire or water.
¾
Do not carry or store batteries with other metallic objects. Doing so could cause batteries to
short circuit, leak or explode.
¾
Never recharge a battery unless it is confirmed to be a rechargeable type.
Remote Control
The included remote control allows the unit to be operated from a distance.
When using the remote control, point it towards the remote sensor on the front of the unit.
¾
Even if the remote control is used within its effective operation range (5 m), the unit might not
respond to the remote if there are any obstacles between them.
¾
The remote control might function incorrectly if it is operated near other products that generate
infrared rays or if other remote control devices that use infrared rays are operated near the unit.
Likewise, the other products might also function incorrectly.
Battery installation
1- Remove the battery compartment cover.
2- Put in the lithium battery (CR2025, 3 V).
3- Close the cover.
Battery replacement
If the distance to the unit from which the remote control can be used decreases, the battery is losing its
charge. In this case replace the battery with a new one.
¾
For information about the collection of batteries, please contact your local municipality, your
waste disposal service or the place where you purchased them.
