Listening to an External Source
1
Connect the PHONES jack (audio
output jack) of a portable audio
player to the AUX IN jack of the SR
L200i using the supplied stereo mini
plug cable.
You can use this way of connection to
listen to an iPod that has no Dock
connector or that has, but an appropriate
Dock adapter is not available.
2
Press the AUX button.
3
Play the source, and adjust the
volume using the VOLUME button of
the SR-L200i and of the audio player.
When using the PHONES jack of your
mini player, you must adjust the volume
of the mini-player or you may hear no
sound from your SR-L200i.
<
Turning the volume of the mini player up
too high may cause the sound from your
SR-L200i to be distorted. If this is the
case, reduce the volume of the mini
player until the distortion stops and then
adjust the volume level of the SR-L200i
to a comfortable listening level
Troubleshooting
If you have problems with your system, look
through this chart and see if you can solve
the problem yourself before calling your
dealer or TEAC service center.
General
No power
e
Check the connection to the AC power
supply. Check and make sure the AC
source is not a switched outlet and
that, if it is, the switch is turned on.
Make sure there is power to the AC
outlet by plugging another item such as
a lamp or fan into the outlet.
No sound from speakers.
e
Select the source by pressing the
TUNER, iPod or AUX button.
e
Adjust the volume.
e
Pull out the headphone’s plug from the
PHONES jack.
e
If the MUTING indicator lights on the
display, press the MUTING button.
The sound is noisy.
e
The unit is too close to a TV or similar
appliances. Install the unit apart from
them, or turn them off.
Remote control doesn’t work.
e
Press the STANDBY/ON switch to turn
the unit on.
e
If the battery is exhausted, replace it
with a new one.
e
Use remote control unit within the
range (5 m) and point at the remote
sensor on the front panel.
e
Clear obstacles between the remote
control unit and the main unit.
e
If a strong light is near the unit, turn it
off.
iPod Player
Cannot insert the iPod.
e
Check the dock adapter.
e
Remove dust or obstacles from the
Dock connector of the SR-L200i and
the iPod, and insert the iPod again.
Will not play.
e
Remove the iPod from the dock, wait a
few seconds, and insert it again.
e
Software update may solve the
problem. Visit the Apple website and
download the latest iPod Software.
Cannot operate the iPod.
e
Set off the HOLD switch of the iPod.
Tuner
Cannot listen to any station, or signal is
too weak.
e
Tune in the station properly.
e
Rotate the FM or the AM antenna until
you get stations clearly.
Though the broadcast is stereo, it
sounds monaural.
e
Press the FM MODE button.
If normal operation cannot be
recovered, unplug the power cord from
the outlet and plug it again.
ENGLISH
26
27
