Teac SR-80iDAB, Руководство пользователя

Страница: 8 / 40

8
Remote Control Unit
The provided remote control unit allows the unit to be
operated from a distance.
When operating the remote control unit, point it towards
the remote sensor on the front panel of the unit.
<
Even if the remote control unit is operated within the
effective range (16ft / 5 m), remote control operation
may be impossible if there are any obstacles between
the unit and the remote control.
<
If the remote control unit is operated near other
products which generate infrared rays, or if other
remote control devices using infrared rays are used
near the unit, it may operate incorrectly. Conversely, the
other products may operate incorrectly.
Battery installation
1
Remove the battery compartment cover.
2
Put the lithium-ion battery (CR2025, 3 V) in with the “+”
side up.
3
Close the cover.
Battery replacement
If the distance required between the remote control unit
and main unit decreases, the battery is exhausted. In this
case, replace the battery with a new one.
<
For information about the collection of batteries, please
contact your local municipality, your waste disposal
service or the place where you purchased them.
Battery Precautions
Misuse of batteries could cause them to rupture or leak
leading to fire, injury or the staining of nearby things. Please
read and observe the following precautions carefully.
<
Be sure to insert the battery with the positive “+” and
negative “ - ” polarities correctly positioned.
<
If the battery leaks, wipe away the leakage inside the
battery compartment and replace the battery with a
new one.
<
If the remote control unit is not to be used for a long
time (more than a month), remove the battery from the
remote control unit to prevent it from being exhausted.
<
Do not use any batteries other than those specified.
<
Do not heat or disassemble batteries. Never throw them
in fire or water.
<
Do not carry or store batteries with other metallic
objects. The batteries could short circuit, leak or
explode.