Teac SR-80iDAB, Руководство пользователя

Страница: 34 / 40

34
If you a have problem with your system, read this page and
try to solve the problem yourself before calling your dealer
or a TEAC service Center.
General
No power
e
Check the connection to the AC power supply. Check
whether or not the AC source is a switched socket. If it
is, confirm that the switch is turned on.
e
Confirm that there is power to the AC wall socket by
plugging another item such as a lamp or fan into it.
No sound from the speakers.
e
Select the source by pressing the FUNCTION button.
e
Adjust the volume.
e
If “Muting” lights, press the MUTING button.
The sound is noisy.
e
The unit is too close to a TV or similar device. Relocate
it away from the interfering device or turn it off.
The remote control does not work.
e
If the battery is exhausted, replace it with a new one.
e
Use the remote control unit within the operation
range (13ft / 4 m) and point it at the remote sensor on
the front panel.
e
Remove obstacles between the remote control unit
and the main unit.
e
If a bright light is near the unit, turn it off.
iPod/iPhone Player
Cannot connect the iPod/iPhone.
e
Remove dust or obstacles from the dock connector
of SR-80iDAB and the iPod/iPhone, then connect the
iPod/iPhone again.
Cannot operate the iPod/iPhone.
e
Release the iPod/iPhone HOLD switch.
Cannot play.
e
Remove the iPod/iPhone from the dock, wait a few
seconds, then connect it again.
e
A software update might solve the problem. Visit the
Apple website and download the latest iPod/iPhone
software.
e
Before connecting the iPod/iPhone to the dock set
the iPod/iPhone “power on”. If the iPod/iPhone is
connected to the dock with the “power off” the
playback may not start correctly.
Troubleshooting Sleep Timer
You can set the sleep timer so that the unit turns itself off
after a specified amount of time.
Each time the SLEEP button is pressed, the time is
changed at 15 minute intervals.
The unit will automatically will be turned off when the
time elapses.
90 min
75 min
60 min
45 min
30 min
15 min
OFF
o
During the sleep timer is activated, the display is
dimmed and “S” lights.
<
If you want to check the remaining time, press the
SLEEP button once. The remaining time is displayed for
a few seconds.
During the remaining time display, if you press the
SLEEP button again, the sleep timer will be canceled.
o
This operation is available in every sound source.