Teac SR-100i, Руководство пользователя

Страница: 5 / 100

5
EN
GL
IS
H
What’s in the box
Confirm the supplied standard accessories.
Remote control unit (RC-1265) x 1
Battery (CR2025) for remote control unit x 1
AC power cord x 1
or
<
The shape of the plug varies according to the region.
FM antenna x 1
USB cable x 1
Owner’s manual (this document) x 1
<
Keep this manual in a safe place for future reference.
Warranty card x 1
CAUTION
<
Do not tilt the unit with a disc inserted. It may damage
the disc and cause a malfunction.
<
Do not move the unit during disc playback.
During playback, the disc rotates at high speed. Do not
lift or move the unit during playback. Doing so might
damage the disc or the unit.
<
The voltage supplied to the unit should match the
voltage as printed on the rear panel. If you are in any
doubt regarding this matter, consult an electrician.
<
Do not open the cabinet because this might result in
damage to the circuitry or electrical shock. If a foreign
object should get into the unit, contact your dealer or
service company.
Before Using the Unit
<
When removing the AC power plug from the wall
socket, always pull directly on the plug, never yank on
the cord.
<
Always remove the disc before relocating or moving
this unit. Moving the unit with a disc inside it could
cause malfunction.
Placement of the unit
<
Choose the installation location of your unit carefully.
Avoid placing it in direct sunlight or close to a source of
heat. You should also avoid locations that are subject to
vibration, excessive dust, heat, cold or moisture.
<
As the unit may become warm during operation, always
leave sufficient space around it for ventilation.
<
Do not place the unit on an amplifier, a receiver or any
other device that generates heat.
<
When the unit is turned on, if a TV is turned on nearby
lines might appear on the TV screen depending on the
frequency of the TV broadcast. This is not a malfunction
of the unit or the TV. If you see such lines, move the unit
and the TV further apart.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use a diluted mild liquid soap. Allow the surface of the unit
to dry completely before using.
For safety, disconnect the power cord from the outlet
before cleaning.
<
Never spray liquid directly on this unit.
<
Do not use thinner or alcohol as they could damage the
surface of the unit.
Beware of condensation
When the unit is moved from a cold to a warm place, or
used after a sudden temperature change, there is a danger
of condensation. Vapour in the air could condense on
internal mechanisms, making correct operation erratic or
impossible. To prevent this, or if this occurs, leave the unit
turned on for one or two hours. Then the unit will stabilize
at the temperature of its surroundings.