TEAC Flash Drive Smart & Elite User’s Guide
Page 9 of 14
4 FLASH DRIVE SMART & ELITE SPECIFICATIONS
Items Descriptions
Supported PC System with USB Ports
IBM PC/AT Notebook and Sub-Notebook
Supported Operating Systems
Windows
98/ 98’SE/ 2000/ ME/ XP and Mac OS 9.x
and above
Power Supply
USB bus-powered (4.5V to 5.5V)
Capacity (MB) **
128/ 256/ 512
Host Interface
Universal Serial Bus, USB Spec. 2.0:
EHCI (Enhanced Host Controller Interface)
Universal Serial Bus, USB Spec. 1.1:
UHCI (Universal Host Controller Interface)
OHCI (Open Host Controller Interface)
Operating Current
< 150mA
Suspend Current
< 500uA
Data Retention
10 years
Write Protection
Yes, with write protection switch
1 LED built-in
LED on: Flash Drive Smart & Elite connected and
enumerated
LED blinking: Data receiving and transmitting
Data Reading Speed
(Flash Drive Smart & Elite to Host)
7.0MBytes/Sec (Depending on PC system)
Data Writing Speed
(Host to Flash Drive Smart & Elite)
4.5MBytes/Sec (Depending on PC system)
Operating Temperature
0
°
C ~ +50
°
C
Storage Temperature
-20
°
C ~ +80
°
C
Relative Humidity under operation
(Non-Condensation)
20% ~ 80%
Relative Humidity under storage
(Non-Condensation)
5% ~ 95%
Dimension (L x W x H)
68 mm x 19 mm x 8 mm
Weight 12g
(approx.)
EMI Compliance
FCC Class B, CE, VCCI, C-TICK
*For reference only. We reserve the rights to make changes on any specifications without any notice.
**These are nominal values. Due to the characteristics of flash memory chip, bad memory bits or blocks may
be present. Factory specifies that actual memory is not less than 95%of nominal on delivery.
