4. Press a device button to select a device. The
device name and a device 4-digit code
appear in the display.
5. Enter the desired 4-digit code. See the
attached sheet for a list of pre-codes.
<
Using the numbered keys on the touch screen,
enter a 4-digit code from the pre-programmed
code list on the attached sheet.
OR
<
After selecting a device, you can also use the
g
and
t
keys to scroll through available
device 4-digit codes.
OR
Device
name
4-digit
code
8
Setting Key Codes 1
Pre-programmed Code Setting
If the remote controlled component is a TV, these
pre-programmed code settings are already
available in the remote control. By just selecting a
code, your RC-L800 emulates the original remote
control. There are two methods to select these
devices, Manual and Auto. These methods are
described below.
Note:
A very small number of functions or keys may not
be emulated properly.
Manual
1. Enter the setup mode.
2. Press
5
or
b
to select CODE and press
ENTER.
3. Press
5
or
b
to select PRE-CODE and press
ENTER.
