Teac plh4220sd, Руководство пользователя

Страница: 8 / 27

- 8 -
Assemble instruction Assemble instruction
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
STAND IN STALLATION
base subassembly
screw A
12m m
screw A
screw A
base subassembly
Fig.1
Mount Installation
Mount Preparation
1. Take the mounting components out of the box.
2. Inspect and become familiar with all hardware before beginning installation.
3. Invert the plasma and place screen side down on a soft and flat surface.
NOTE: Failure to do so may result in breaking, denting, and scratching the plasma display.
4. Locate the six (6x M5X12) screw A and mounting points found on the base of the plasma stand and plasma bracket (see Figure 1).
5. Tighten the six (6) screws with a Phillip head screwdriver and ensure it firmly tighten (Figure 1).
6. Locate the four screw A and mounting points found on the back of the plasma TV (see figure 2).
7. Affix and tighten the four (4x M5X12) screw A according the fig. 2 and ensure that screws are tighten firmly.
CAUTION: Do not over tighten the (M5) screws.
Mount Installation
Mount Preparation
1. Take the mounting components out of the box.
2. Inspect and become familiar with all hardware before beginning installation.
3. Invert the plasma and place screen side down on a soft and flat surface.
NOTE: Failure to do so may result in breaking, denting, and scratching the plasma display.
4. Locate the six (6x M5X12) screw A and mounting points found on the base of the plasma stand and plasma bracket (see Figure 1).
5. Tighten the six (6) screws with a Phillip head screwdriver and ensure it firmly tighten (Figure 1).
6. Locate the four screw A and mounting points found on the back of the plasma TV (see figure 2).
7. Affix and tighten the four (4x M5X12) screw A according the fig. 2 and ensure that screws are tighten firmly.
CAUTION: Do not over tighten the (M5) screws.