Teac plh4220sd, Руководство пользователя

Страница: 21 / 27

- 21 -
Using the TV features
Using the PC menu
1) Press MENU button to enter the main menu.
2) Press [VOL+ or VOL-] button to select the item
PC Parameters.
3) Press [CH+ or CH-] button to select the item you
want to adjust.
NOTE: 1)The menu is useful only on VGA/DVI and HDTV mode.
It is useless in others mode.
2) The button [AUTO] is used to adjust position of picture
automatic and it is effective
The button [
The button [CLOCK] and [PHASE] can be use to adjust for best
only on VGA/DVI mode.
AUTO COLOUR] is used to adjust quality
of picture manually when signal is not good sometimes.
The button [POSITION] is used to adjust the position of
picture.
quality picture.
LANGUAGE ENGLISH
Auto
Clock
Phase
Position
PC Parameters
I/p info
3) In HDTV mode ,Clock can not be select.
4) In DVI mode, I/P info can be select only.
WARNING:
Do not try to remove the cabinet back. Refer servicing to qualified service technicians.
To clean the TV screen:
1) Unplug the TV to avoid possible shock hazard.
2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm
water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet
can cause damage to the TV.
3) Wipe off any excess moisture with a clean dry cloth.
4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution
: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the finish of the cabinet.
Cleaning and care
Appendix
MADI: (Motion Adaptive De-Interlacing)The areas that are not moving in an image will be fully static (flicker free) and the
objects that are moving will have smooth edge.
DCDi: Edge correction, to reduce jagged edge and visible artifact which result in a smooth and nature looking image.
Interpolation: (LADI: Low Angle Diagonal Interpolation)
further enhancement for diagonal moving image.
CCS: Cross Colour Suppressor: removes cross colour artifacts in composite video signals due to poor Y/C separation in
Standard 2D video decoder, enable 3D-type performance.