Teac NT-503, Сетевое руководство

Страница: 16 / 116

16
Settings
1
Press the MENU button to show the setting items.
2
Turn the INPUT SELECTOR knob to show the setting
to be changed.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control.
The menu items appear in the following order.
UPCONVERT
PCM D-FILTER
DSD D-FILTER
CLOCK SYNC
LINE OUT
LINE OUT LEVEL
DIMMER
AUTO POWER SAVE
NET STANDBY
NETWORK SETUP*
*Shown only when the input source is NET/USBf
3
Press the INPUT SELECTOR knob to confirm the
selection.
o
You can also press the ENTER button on the remote control.
o
The currently set value is shown on the display.
4
Turn the INPUT SELECTOR knob to change the set-
ting value.
o
You can also use the up and down (
k
,
j
) buttons on the
remote control.
o
Press the MENU button to return to setting item selection.
5
When you are done changing settings, press the
MENU button to show the input source status
again.
o
If you do not do anything for about 10 seconds, the display
will return to showing the input source status.