RADIO OPERATION
BASIC OPERATION
1.
Press FM/AM button to select FM or AM mode.
2.
Press or buttons to select a radio station.
* If you press for less than 0.5 seconds each time, the receiving frequency will step up or down.
* If you press and hold for more than 0.5 seconds, the frequency will keep on increasing automatically unit a radio
station received.
3.
Adjust to the desired sound and volume.
RADIO STATION MEMORY
You can store up to 20 FM stations and 20 AM stations in channel memory.
SETTING STATION
1.
Press FM/AM button to select FM or AM mode.
2.
For Auto Tuning, use or buttons to select the desired station.
3.
Press SET/PGM button. “MEMORY” and “00” indicators will appeared on display. Use /- buttons (on Remote
Control) or use Preset (1-20) (On Main Unit) to select 1-20 memory location you want to store the selected station at.
4.
Press SET/PGM button again to save into memory. The former station at the memory location is replaced.
5.
Repeat step 3-5 to store additional station.
PLAYING PRESET STATIONS
1.
Press FM/AM button to select FM or AM mode.
2.
Press PRESET (1-20) button (on Main Unit) to select a preset channel directly. Or press +/- button (on Remote) to select
the desired preset channel.
LAST MEMORY AND MEMORY BACKUP
The last tuner station will be retained and recalled when you turn the system on. The tuned station will be stored in memory
backup even if AC power is disconnected or cut due to temporary power failure.
FOR BETTER AM RECEPTION
DO NOT CONNECT TO AN OUTSIDE ANTENNA. Reposition the unit to get better AM reception.
TURNING OFF YOUR STEREO
To shutdown your system after listening, press POWER button once.
10
