Precautions & General Maintenance
•
Place the set on a hard and flat surface so that the
system does not tilt.
•
Do not expose the set, batteries or CDs to
humidity, rain, sand or excessive heat caused by
heating equipment or direct sunlight.
•
Do not cover the set. Adequate ventilation with a
minimum gap of 6 inches between the ventilation
holes and surrounding surfaces is necessary to
prevent heat build-up.
•
The mechanical parts of the set contain self-
lubricating bearings and must not be oiled or
lubricated.
•
To clean the set, use a soft dry cloth. Do not use
any cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the
housing.
CD player and CD handling
•
The lens of the CD player should never be touched!
•
Sudden changes in the surrounding temperature can cause condensation to form and the lens of your CD player to
cloud over. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment
until the moisture evaporates.
•
Always close the CD door to keep the CD compartment dust-free. To clean, dust the compartment with a soft dry cloth.
•
To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning
agents as they may damage the disc.
•
Never write on a CD or attach any stickers to it.
MAINTENANCE & SAFETY
X
EN-
8
EN-
9
CD Player
Playing a CD
This CD-player can play Audio Discs, ,CD-R, and
CD Rewritables. Do not try to play CD-ROM, CDi, VCD,
DVD or computer CD.
1
Slide the FUNCTION selector to the CD position.
Display: shows
Briefly.
2
To open the CD door,
push
the CD door at the edge
marked
3
Insert a CD, CD-R or CD-RW with the printed side
facing up, gently close the CD door.
4
Press
PLAY/PAUSE
on the set to start playback.
5
To pause playback press
PLAY/PAUSE
To resume, press
PLAY/PAUSE
again.
6
To stop CD playback, press
STOP
．
–
–
–
Selecting a different track
During playback you can use
or
to select a
particular track.
•
If you have selected a track number in the stop or
pause position, press
PLAY/PAUSE
to start playback.
•
Press
once briefly for the next track, or press
repeatedly until the desired track number appears
in the display.
•
Press
once briefly to return to the beginning of
a current track.
•
Press
more than once briefly for previous
t
racks
.
–
–
Programming track numbers
You may store up to
32
tracks in
any
desired
sequence. If you like, store any track more than once.
1
In
STOP
Mode, press
the
prog. , then
or buttons
to select your desired track.
2
When your chosen track number appears (the number
will flash), press the PROG button once to store the track.
The display shows a flashing PROG and the program
number that you are up to.
．
Reviewing your set program
•
In
STOP
mode,
press the PROGRAM button.
Erasing a program
You can erase the contents of the memory by:
–
sliding the FUNCTION selector to the RADIO
–
position, after pressing STOP.
–
The display shows your stored track numbers
in sequence.
- -
CD PLAYER
OPEN /
.
CLOSE
Searching a track
During playback you can use the or to search for a particular spot in a track.
Hold the or buttons in and the unit will begin to scan the track, release
the buttons when you have reached your desired spot.
Repeat play modes
Press the REPEAT button once, REPEAT appears in the display and
the current track is played continuously.
Press the REPEAT button twice, REPEAT ALL appears in the display
and the entire CD is played continuously.
3 Press
or
to select the next track followed by the PROGRAM
button to store that track. Again the display shows a flashing
PROG icon and the program number you are up to.
4
Repeat step 3 until all desired tracks are stored
To play your program,press PLAY/PAUSE.
