1
TEAC LP-R660USB USER GUIDE
NOTICE:
Please read before using the Recorder
! Don’t be afraid to ask for help if you
need it!
RECORDING TO A CD-R/CD-RW
Recording from a Cassette
1) Power on the recorder by pressing the
Power
button on the front panel of the
device.
2) Set the recording source by pressing the
PHONO/TAPE/AUX
button on the front
panel of the device until the display reads
TAPE
in the top-left corner.
3) Load a recordable
CD-R
or
CD-RW
disc into the recorder.
a) Open the disc tray by pressing the
Open/Close
button on the front panel of the
device.
b) Insert a recordable disc into the disc tray.
c) Press the
Open/Close
button again to close the disc tray.
(Note: If
NO TOC
and
CD-R
(or
CD-RW
) do not appear at the top of the display, you
will not be able to make a recording. This usually means the disc you inserted is
either not recordable or has already been used to make a recording.)
4) Choose the tape type by flipping the
Tape
switch on the top of the device. (Note:
Look at your cassette to find out what kind of tape it uses. It should be labeled with
either Type I, II, or IV.)
a) If your cassette tape uses Type I tape, flip the switch to
Normal
.
b) If your cassette tape uses Type II or IV tape, flip the switch to
High
.
5) Load a cassette into the recorder.
6) Press the
Record
button on the front panel of the device to set it to recording mode.
(Note: This will not start the recording yet.)
