Teac LEDV2282FHD, Руководство по обслуживанию

Страница: 5 / 46

1. When installing the LED module in the LED cover,be
handling the LED module:
Precautions for handling the LED module
1-4. Handling the LED Module
In case the screen is damaged and the internal liquid
leaks,do not suck or drink the internal fuid. Nor do you
touch it either ,otherwise you might be poisoned or get a
rash with your skin,If the internal fluid enters your
mouth,rinse with water.If itadheres to your skin or
clothes,wipe it away with alcohol and then wash with water.
If it enters your eyes,wash with running water immediately.
The LED module can be easily damaged during assembly
or disassembly.Observe the following precautions when
sure to seat it so that it is properly aligned and
maximum visibility of the display is maintained.
2. If the panel’s surface gets dirty,wipe it with cotton or a
soft cloth.If it is still dirty,try breathing on the surface
to create a light condensate and wipe it again.If the
surface is very dirty,we recommend a CRT cleaning
agent.Apply the agent to a cloth and then wipe the
panel’s surface .Do not apply cleanser directly to the
panel .Also,neverscratch the suface.
3. If water or other liquid is left on the panel’s surface for
a long period,it can change the screen’s tint or stain it.
Be sure to quickly wipe off any liquid.
4. Glass is used in the panel ,so be careful not to drop it
or let it strike a hard object ,which could cause
breakage or cracks.
5. CMOS-LSI circuits are used in the module,so guard
against damage from electrostatic discharge.Be sure to
wear aa wrist or ankle ground when handling the
module.
6. Do not expose the module to direct sunlight or strong
ultraviolet rays for long periods.
7. Do not store the module a temperatures below
specifications.Cold can cause the liquid crystals to
freeze,lose their elasticity or otherwise suffer damage.