4
What is Included/TV Placement Setup
TV Stand Installation/Removal
2 Screws
ST4*14
2 Screws
ST4*14
Wall Mounting
The TV is provided with mounting holes for a VESA approved wall mounting bracket
(NOT SUPPLIED). The VESA mounting pattern is 100 x 100 mm. Remove the screws
holding the base to the base bracket and lift the base away (do not remove the base
mounting brackets). Mount the VESA bracket using 4 x M4 x 8 isometric threaded
screws (not supplied). Do not use screws longer than 8 mm; damage will occur to
the internal components.
Caution: Your new TV is heavy; please consult with a professional wall mount installer
WARNING: Large TVs can fall over and cause major damage injury. If you are standing
a large TV on its feet, we recommend that you fix the body of the TV to the wall using
furniture straps, so that the TV cannot be tipped over by children or pets.
to perform this installation.
Unit and Accessories
TV Set
Remote Control
with Batteries
Base Stand
Stand Support
4 Screws
User’s Manual
Four mounting holes
(size M4 screw)
100mm
100mm
USER MANUAL
WARRANTY INFORMATION INSIDE. PLEASE READ
www.teac.com.au
IMPORTANT !
LE32A321
LED TV
Trademark of TEAC Corporation JAPAN
NOTA: Wall hanging height of the whole machine shall not exceed 2m.
FAV
OK
