46
DVD Playback Operation
Preparation
1.
Connect the unit to the power supply and press the
POWER
button to turn on the unit.
2.
Repeatedly press the
INPUT
button on the remote control to select DVD mode and press the
ENTER
button to enter.
3.
Gently insert the disc, with the label side toward the front of the television, into the disc tray slot
until about half of the disc is in the tray and then the disc will be drawn into the disc tray and loaded
automatically.
Note: DVD mode must be selected before inserting disc.
4.
Press the
EJECT
button to eject the disc
. The disc has to be reloaded manually by gently pushing
the disc back into the disc tray.
Warning:
The u
se of poor quality discs could result in damage to the television.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the
discs being played
. If the
codes don
not
match, the disc cannot be played. This player’s default code is 4.
Play
Press the
PLAY
button to start playback.
Stop
During playback, press the
■
STOP
button once to stop playback and press the
►
PLAY
button to
resume normal playback. Press the
■
STOP
button twice to stop playback completely.
Pause
During playback, press
the
PAUSE
button once to pause the playback; press it repeatedly to start
step-by-step playback. Press the
►
PLAY
button to resume normal playback.