Teac HDR2250T, Руководство пользователя

Страница: 25 / 27

22
System Information
View technical information about the unit.
Firmware Update
If you have downloaded a new firmware from www.teac.com.au and put it on a USB drive, you
can run it with this function. You need to key in the password to access this function.
1. Format the USB drive to the FAT32 file system before you start the process.
2. Download and save the firmware (
HDR2250T … .mupg) to the root directory of the USB
drive.
3. Insert the USB drive into the USB port in front of the HDR2250T unit.
4. Press the
MENU button, then press the LEFT/RIGHT buttons to go to the Settings
menu.
5. Press DOWN to highlight Firmware Upgrade and press OK .
6. Enter the password (default: 0000).
7. Start the firmware upgrade by pressing the
RED button.
8. Press OK to select the firmware.
9. Wait for the firmware to install itself. DO NOT shut off power. Once done, the unit comes
back to the Initial Setup Menu.
10. Press EXIT to quit the Initial Setup Menu.
11. Repeat steps 4 to 9. This is done to fully overwrite the entire firmware on the unit.
12. When you are back at the Initial Setup Menu, scroll down to select Auto Search.
13. Press
OK to re-scan all the channels.
14. You can check and confirm the software version in System Information under the
Settings menu.
Note : All user settings, channels and scheduled timers will be erased during firmware upgrades.
Contact TEAC Australia if you require support at 1300 553 315.
Factory Default
Reset the unit's settings to factory defaults, so that you can run it as if it were new. This will
delete all customised settings. You need to key in the password to access this function.