BASIC OPERATION
Radio Mode
- To enter Radio Mode, press the
FUNCTION F
key repeatedly until the display shows
“
FM
”
.
- To improve radio reception, adjust the position of the unit. To further enhance reception, take
the supplied external FM antenna and plug it into the FM antenna socket on the rear panel.
- After tuning into a desired station, use the
FM MODE
key to switch between MONO/STEREO
audio modes. When reception is poor, MONO mode is recommended for better clarity.
Manual Frequency Adjustment (Scan Mode)
- Press the
TUNE+
or
TUNE-
keys to manually adjust the radio frequency 1 step at a time.
- When the desired station is reached, it can be saved into memory for quick access.
(See the
“Radio
Station Memor
y” section for further details.)
Automatic Frequency Adjustment (Seek Mode)
- Press and hold (for 2 seconds) the
TUNE+
or
TUNE-
keys to search for the next available
radio station frequency.
- When the desired station is reached, it can be saved into memory for quick access.
(See the
“Radio
Station Memor
y” section for further details.)
Radio Station Memory
- After tuning into a desired station, it can be stored into memory for quick access.
- Press the
PROG
key to go into the memory tuning stage. The display will show
“
P-01
”
flashing.
- Press the
or
MEMORY-
keys to choose the desired memory storage
position you would like to save the current station into (P-01 to P-20).
- Press the
PROG
key again to confirm your selection and save the station into memory.
Recalling a saved memory station
- Press the
or
MEMORY-
keys to cycle through stations saved into memory.
- To erase a saved radio station, simply overwrite it with a new station frequency in the same
memory position.
