![Teac Ghetto Blaster JR PBT500 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/teac/ghetto-blaster-jr-pbt500/ghetto-blaster-jr-pbt500_user-manual_3981069007.webp)
BASIC OPERATION
Volume Control
- Adjusting loudness can be done by using the volume control on this unit and also the volume
control of the device you have already connected to (if using Bluetooth or AUX-Input Jack).
NOTE:
If there is no sound, ensure the volume on both devices is not set to 0.
Treble/Bass Control
To enhance the quality of music, this powerful sound system comes with two additional
equalization functions. At anytime during playback, you can press the
Bass
and
/-
keys for stronger bass/highs.
Function Key
Press the
FUNCTION F
key repeatedly to cycle through and select any one of the following
audio sources, shown below:
Bluetooth®
Wireless Playback (A2DP Audio Streaming)
The FREESTYLER JR can wirelessly receive audio streams from devices with
Bluetooth
®
A2DP capabilities within approx. 30 feet (10m). Pair your device to this unit for wireless audio
playback.
Pairing a device:
- Enable the
Bluetooth
®
function on the device you would like to pair up (eg. your
smartphone/tablet/laptop).
- To enter
Bluetooth
®
Mode, press the
FUNCTION F
key repeatedly until
“
BT
” is on the
display.
- From your device's
Bluetooth
®
scanning menu, search for “FREESTYLER JR
”
and select it.
- If asked for a passcode, key in “0000”.
- The
Bluetooth
®
Status LED Indicator will indicate the Bluetooth Status of the unit:
NOTES:
- The FREESTYLER JR remembers up to 4 devices. As long as it remembers a device, there
is no need to repeat this pairing procedure, even if the unit has been powered off since the
pairing.
- The FREESTYLER JR will also automatically pair with the LAST paired device, if found,
when it is powered on and switched to
Bluetooth
®
mode.
Unpairing a device:
Only one device can be paired at any given time, but the unit will remember up to 4 devices.
To pair a different device when the FREESTYLER JR is already paired, first disconnect the
active connection by either turning off
Bluetooth
®
on the first device, or by unpairing it.
To unpair a
Bluetooth
®
device that has already been paired, press and hold the
PAIRING
key
for a few seconds until the pairing status on display changes from “CONNECTED” to
“SEARCHING”.
STATUS STATUS INDICATOR
Searching
LED flashes slowly
Pairing
LED blinks faster
Connected
LED stays lit
BT
FM
USB
SD
AUX
Bluetooth
Radio
MP3
player
MP3
player
Input
Jack