Teac EU2890ST, Руководство пользователя

Страница: 10 / 20

SETTING TV PROGRAMMES
When switching on the TV set for the first time or
if you want to change programme settings, use
the
MENU key
‹
and move to "MENU" . From
this menu you can move to the following menu:
•
INSTALLATION
•
SPECIAL
•
ZOOM (see page 12)
In "MENU" you can select between stated
menus with the p
“
and q
—
keys. The
selected menu is always illuminated. To switch
on the selected menu use the
t
”
or u
–
keys.
Use the p
“
, t
”
, u
–
and q
—
keys in the
same way in every menu.
MENU "INSTALLATION"
searching the flashing "..." sign is displayed near
the "AUTOSTORE" . If you want to interrupt
searching, press key STOP on the remote
control.
When searching is finished, the TV channels
which were found are automatically sorted and
stored. For identified programmes their name is
displayed, while others are marked wit a letter P
and successive number. When finished, the TV
set returns to
"INFO" menu. You can also return
to this menu at any time by interrupting the
automatic search.
To exit the
"INFO" menu, press the key
›
¢
.
Return to "INSTALLATION" menu via
"MENU" . In "INSTALLATION" menu the
channels can be manually searched. Use it if you
want to find a channel with very weak signal or
simply if you want to find another programme
without activating automatic search. Use the
p
“
or q
—
keys and illuminate selection
"PROGRAM NR" . Use the use the t
”
or u
–
keys and select the programme location, where
you want to store your programme.
Use the
p
“
and
q
—
keys and illumunate
selection "CHANNEL" . Channel can be set
using one of the following procedures. Use the
t
”
or u
–
keys and select the previous or the
next channel or simply enter the number of the
channel. Use the
OK
•
key and move to the S
range or back.
If the signal of the selected channel is very weak
you can improve it as follows: use the
p
“
and
q
—
keys and illuminate the "FINE TUNING"
selection and set the optimum value with the
t
”
and u
–
keys.
If you want to store modifications, move to the
"STORE" selection. Use the t
”
or u
–
keys
and activate storing procedure. The "STORE"
sign in the menu flashes in red for a second.
To exit the "INSTALLATION" menu, press the
key
›
¢
.
INSTALLATION
AUTOSTORE >>
PROGRAM NR. 04
CHANNEL C12
FINE TUNE
STORE < >
This menu is used for searching, sorting and
storing of programmes.
Move to selection
"AUTOSTORE" with keys
p
“
or q
—
.
When "AUTOSTORE" is illuminated use the key
u
–
to start automatic channel searching
through the entire frequency range VHS, UHF
and S. By pressing the same key once again, the
"AUTOSTORE" sign is displayed. Confirm
searching by pressing the key OK
•
. During
10
MENU
INSTALLATION >
SPECIAL >
ZOOM >