Teac DVW-D11, Руководство пользователя

Страница: 16 / 38

Basic Operation
8 TEAC DVD Duplicator User’s Manual
Basic Operation
This section explains the basic operation of the DVD Duplicator.
Copying from the Optical (DVD) Source Drive
1. Place a source disc in the disc tray of the source drive.
2. Switch to function
[1 Copy]
by pressing the button (if necessary).
3. Place a blank DVD-R disc into the target drive, then press the
(ENT)
button to start copying.
When the copy operation is complete, the DVD disc in the target drives will
be ejected automatically.
Note: The following instructions apply to both DVD Duplicator models.
Note:
❑
With the default setting, after a source disc has been successfully copied, the
DVD Duplicator automatically ejects the target DVD disc.
❑
With the default setting, if the copy operation fails, the failed target DVD disc
remains in the target drive. To remove the failed DVD disc, press the eject
button on the target drive and retrieve the disc. Press the eject button again
to retract the disc tray. You can change the default settings by using the
[Advanced Setup] menu. (For more information, see “12 Advanced Setup
(Adv Setup)” on page 19.)
TEACdvwd11.book Page 8 Sunday, May 1, 2005 6:04 PM