Teac DVP705, Руководство пользователя

Страница: 16 / 23

2. AUDIO SETUP
There are three items in the AUDIO
SETUP PAGE. They are ANALOG
AUDIO, DIGITAL AUDIO and DOLBY
DIGITAL .
-12-
SYSTEM SETUP
--AUDIO SETUP PAGE--
SPEAKER SETUP
SPDIF SETUP
DOLBY DIGITAL SETUP
EQUALLZER
GO TO AUDIO SETUP PAGE
1.5 SCREEN SAVER
ON: If the image remains motionless on the screen, for example the disc is paused,
stopped etc, for several minutes, a screen saver will appear on the screen. You can
press any key or button to wake it up.
OFF: Disable the screen saver function.
1.6 LAST MEMORY
ON: Each time you turn off the unit or stop the disc, it will memorize the last play time.
Next time you turn on the unit and play the same disc, the unit will play from that
memorized point.
OFF: Disable the last memory function.
2.1 SPEAKER SETUP
2.1.1 DOWNMIX MODE
LT/RT: The 5.1-channel audio is mixed into left channel and right channel and
is output via the FR and FR speaker respectively.
STEREO: The 5.1-channel audio is mixed into stereo signal and is output via
the FR and FL speaker.
NOTE: This function only applies to the Dolby AC -3 encoded 5.1-channel discs.
2.1.2 OUTPUT DYNAMIC COMPRESS
This function can compress audio signal with wide dynamic range proportionally to
reduce intense impact to speaker.
2.2 SPDIF SETUP
2.2.1 DIGITAL OUTPUT
SPDIF/ OFF: There will be no digital audio signal output. (Coaxial off)
SPDIF/RAW: The digital audio signal output will be in raw format.
SPDIF/PCM: The digital audio signal output will be in PCM format.
--DOLBY DIGITAL SETUP PAGE--
DUALL MONO STR STEREO
L-MONO
R-MONO
MIX-MONO
DYNAMIC
GO TO DOLBY DIGITAL SETUP PAGE
FULL
3 / 4
1 / 2
1 / 4
OFF
2.3 DOLBY DIGITAL SETUP
2.3.1 DUAL MONO
STEREO: The player outputs the left-
channel audio and right-channel audio
via the FL and FR speaker respectively.
L-MONO: The player outputs the left-
channel audio only via both the FL and
FR speaker.
2.2.2 LPCM OUTPUT
When DIGITAL OUTPUT is set to SPDIF/PCM, this item is available.
Select a sample rating for the analog audio output. There are two options, 48KHz
and96KHz.
NOTE: Some amplifiers don't support 96KHz sampling which will affect the coaxial
output.