21
Channel Setting
This setting is accessible only in the TV mode.
Press the SET UP, and then SETUP screen will
appear.
Select the "TV Setup" by pressing the
5
/
b
buttons,
then press the
t
or ENTER button.
TV Setup menu screen will appear.
3
2
1
TO SET TV CHANNELS AUTOMATICALLY
1. Select the 'Execution APS' menu, then press the
t
or ENTER button.
2. The Auto Searching pop-up appears on the TV
screen.
3. After finishing the AUTO SEARCH Process, the
SETUP menu screen is automatically resumed.
4. Press the RETURN to exit the MENU screen.
Note:
<
Auto memory of channels by the AUTO SEARCH
function is possible only during broadcast.
<
Search time is depending on a mount of channels
and the strength of signals.
TO DELETE A CHANNEL
After setting channels in the memory, you can
delete any unwanted channels.
Select the 'PR ERASE' menu by pressing the
b
b
/
5
5
buttons, then press the
t
t
or ENTER button.
Select a channel No. to erase by pressing the
b
/
5
buttons and press CLEAR on the remote con-
trol unit.
CHANNEL Align
After you have performed the automatic channel
search you may store them in memory on the
channel list systematically.
Select the 'PR MOVE' menu by pressing the
b
/
5
buttons, then press the
t
or ENTER button.
FINE TUNE
If cable or TV signals are unstable, flashing, and
so on, you can fine tune them as follows:
1. Select the FINE TUNE menu by pressing the
b
/
5
buttons, then press the
t
or the ENTER.
The FINE TUNE screen will appear.
2. Select a channel NO. by pressing the
b
/
5
but-
tons, then press the ENTER.
3. Press the
g
or
t
button to obtain the best picture.
4. Press the PRGM to store it.
D
C
B
A
A
B
3
